Using GIS to Develop 2-D Hydraulic Models
As communities along rivers and streams continue to develop, the demand for more accurate floodplain analysis and flood warning will also increase. Computer systems continue to develop...
Evaluating Sensitivity of Hydraulic Control Optimization Models
Sensitivity of hydraulic control optimization models to variation in gradient constraints is examined. Monte Carlo simulation is used in conjunction with repeated optimization runs to...
Joint Probability Distribution of Rainfall Intensity and Duration
Intensity-duration-frequency (IDF) curves are widely used for peak discharge estimation in designing hydraulic structures. Accurate interpolated and extrapolated intensity values are difficult...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Classification of Problem Types
Design and operation of hydraulic systems can be an extremely complex task. Although not widely accepted the application of deterministic optimization techniques can provide guidance to...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Structural Reliability
The focus of this paper is to provide an overview of analysis and optimal design of systems in which the system reliability is dependent upon the structure of the system (such as the layout...
Designing Optimal Reliable Multiquality Water Supply Systems
A methodology which integrates optimal design and reliability of a multiquality water supply system is presented and demonstrated. The system constructed is able to sustain prescribed...
Intelligent Decision Support System for Stage Discharge Analysis
A Decision Support System (DSS) for fitting stage-discharge (S-D) relations is being developed by the University of Manitoba, Facility for Intelligent Decision Support, for Environment...
Impacts of Natural and Manmade Changes on the San Luis Rey River Environment
Almost all rivers continually change their position and shape based on various geomorphic and hydraulic factors, caused by natural as well as manmade activities on the riverine environment....
Modeling Flow in Variably-Saturated Porous Media
An expression for effective hydraulic conductivity to solve groundwater flow problems is developed. Also, a refined Monte Carlo (MC) simulation procedure is proposed. The developed methodologies...
Considering Uncertainties in Water Resource Designs
Design of water resource systems often faces with various uncertainties. The nature of problems in essence are decision making under uncertainties. This paper offers an introduction to...
Recent Advances In Well Hydraulics
Most books and papers on well hydraulics are mostly or entirely aquifer hydraulics. The phrase, 'well hydraulics,' implies a study of the flow into and within a well proper. There has...
Determining Optimal Parameter Dimensions for Water Distribution Network Models
Water distribution systems contain a large number of pipes whose roughness factors are unknown prior to model calibration. During the calibration process, pipe roughnesses for each link...
Tug Fork Flood Plain Modifications and Wetlands Mitigation
The West Virginia Department of Highways (WVDOH) is using a two stage channel excavation concept to mitigate the hydraulic impacts of relocating U.S. Route 119. The selected highway alignment...
Recommendations for Standards in Hydraulics
Prepared by the Task Committee on Recommendations for Standards in Hydraulics of the Hydraulics Division of ASCE. This report investigates whether...
Retaining and Flood Walls
The engineering manual
Utilizing Mathcad for Hydraulic Design of Stormwater Pump Stations
This paper describes how the software Mathcad was used for hydraulic design of three pump stations (i.e. select pumps and size forcemains). The pump stations are part of a complete stormwater...
SCADA System Controls Combined Sewer Overflow Regulation System to Optimize Wastewater Collection
The Metropolitan St. Louis Sewer District's Overflow Regulation System (ORS) project uses computer control of a wastewater collection system for the purpose of combined sewage overflow...
Using Knowledge Based Systems for Training the Young Engineer
A Knowledge Based System 'HYDOC' (Hydraulic Design of Open Channels) is presented as a means to capture the knowledge of evaluating an open channel design problem to help teach evaluating...
Settlement of a 15-Meter Deep Fill Below a Building
The site for a building in western Pennsylvania was undermined, with the mine base about 15 m below planned final grade. Rock above the mine was highly fractured and of poor quality, indicating...
A Case History of Settlement of an Embankment on Lagoonal Deposits Influenced by Artesian Conditions
A geotechnical engineering investigation was performed for the Pearl Kai Center, a shopping center in the Pearl Harbor area of the island of Oahu, Hawaii. The proposed commercial development...
Return to search